Intellian t80W, Installation And Operation User Manual

Page: 38 / 143

t80W/t80Q – Marine Satellite TV Antenna System
38
Receivers Direct Connection
In Universal LNB mode, RF1, RF2, RF3 and RF4 can be connected, however,
when you switch and use the system from universal LNB mode (ex. Europe) to
single LNB mode (ex. US), RF3 and RF4 will not work and only RF1 and RF2 will
transfer the satellite's signal.
When connecting more than 4 receivers, refer to the previous section "Multi-
Switch Connection" for more details.
• Connect the RF cable from the ACU's RF1 connector on the power switch
box located inside of the radome to the ANT. RF1 connector on the rear of
the ACU.
• Connect the RF cable from the RECEIVER's connector on the rear of the
ACU to the RF on the IRD.
• Connect the ship’s gyro cable from the ship’s gyro to the Ship’s Gyro
connector on the ACU.
• Connect the power cable from the AC power connector on the rear of the
ACU to a power source at 110- 220 V AC.
• Press the POWER ON switch on the rear of the ACU to power on the
antenna.
Figure 05. Receivers Direct Connection Configuration
ACU
RF2(Optional)
RF1
RF3(Optional)
RF4(Optional)
Receiver 1
Receiver 2
Receiver 3
Receiver 4