Intelix REM-PACK-8
Installation Manual
4 www.intelix.com
Wiring the Intelix REM-PACK-8
Determining the Cabling Schematic
Before installing the Intelix REM-PACK-8, determine which cabling schematic
best fits your application.
Cabling Schematic A (pictured below; top) allows the remote controls to be
located up to 630 feet from the controlled hardware (typically an Intelix Audisey
Athena matrix mixer/amplifier).
Cabling Schematic B (pictured below; bottom) allows the remote controls to be
located up to 230 feet from the controlled hardware.
The main advantage of wiring according to Cabling Schematic A is system
distance—because only data is being transmitted over the twisted pair cable, the
remotes may be located up to 630 feet from the controlled hardware. The main
disadvantage is having to run both twisted pair cabling (for control) and 18
gauge cabling (for power).
The main advantage of wiring according to Cabling Schematic B is cabling
ease—both power and data are being sent over a single twisted pair cable. The
main disadvantage is distance—you are limited to 230 feet of distance between
the remotes and controlled hardware.
