InteliClean Air 9000 Series, Manual

Page: 7 / 24

Shut off water to toilet by closing the water feed valve.
Flush the toilet to drain the toilet tank.
Install the t-valve between the water supply line and the toilet tank.
So you have two possibilities to close the water in case of repair
or removal. And the toilet flush is working in every case.
Removing the existing toilet seat and cover.
Store the removed seat, cover and screws in a safe place in case
of re-installation
I NSTALLATI ON
Caution before first installation
Connect the unit only to a cold water (drinking water) supply.
Never use rainwater.
You need a power socket 240V and 50Hz.
Do not plug in before you open the water supply.
Note : Steps may vary by type of toilet bowl
Note : Use spanner to tighten all connections before continuing.
Angle valve is not a part of accessories.
InteliClean Air Series instruction manual
- 7 -
dual check
1/2"
cistern
angle valve
hose
unit
Filter