InteliClean Air 9000 Series, Manual, Page: 17 / 24

The unit will not operate properly if the strainer is clogged.
Please clean the strainer regularly.
1. Close the water shut off valve (A)
2. Flush the toilet to empty the water reservoir
3. Use a coin to remove the strainer cap
4. Clean the screen filter with a small brush or water
5. Re-screw the water filter nut
6. Open the water shut off valve (A)
CLEANING THE NOZZLE
CLEANING THE STRAINER
SELF CLEANING NOZZLE
When the “normal shower” button on the side control button is pressed for
3 seconds without sitting on the seat, the nozzle will extract without spraying
and can be cleaned with a soft toothbrush. After cleaning the nozzle,
push “Stop” button on the side control panel and the nozzle retracts itself.
Before and after each use, nozzle will be automatically cleaned by fresh
water rinsing off.
Malfunction caused by lime is not covered by the warranty.
3 seconds
CLEANING/DESCALING NOZZLE TIP AND CHANGING
With lime-containing water, limescale in the shower nozzle easily settles
and reduces showering power. The nozzle tip can be removed / exchanged
for cleaning / descaling as follows:
Open cover and seat
Press the “normal shower” button on the side control panel for 3 sec
The nozzle extracts without spraying
Fix the shower arm with one hand, with the other hand pull the shower
nozzle off. Please make sure that the sealing o-rings do not fall into the toilet.
Clean/descale the nozzle tip with commercially available descaling agents
For attaching the nozzle tip please use a little Vaseline
Then press the “stop button” on the side control panel
CLEANING THE BODY OF UNIT
When you clean the unit, do not use “thinner”, “benzene” or toilet bowl
cleaner. It may cause damage to the surface of unit. Use a wet cloth.
Do not spray water directly on to the unit. When you clean the unit,
disconnect the power plug.
Use only liquids for cleaning the unit.
MAI NTENANCE
InteliClean Air Series instruction manual
- 17 -
(A)