50
Note:
To record videos, the Schedule from item 5.4. Scheduling and mode of item 5.5. Location must be configured
and enabled. And for recording photos, the Schedule from item 5.4. Scheduling and mode from item 5.5. Location
must also be configured and enabled. The location and time of remote recording must be set in item 5.5. Location.
»
Post-recording:
The Post-recording value determines for how long the camera will continue recording after the
Stabilization time, which occurs after motion detection ends. A value can be set between 10 and 300 seconds.
»
Send e-mail:
if this option is selected, the camera will send an e-mail when motion detection occurs, and may or may
not have a photo. The destination e-mail is configured in item
4.5. Services, in the SMTP (e-mail) section,as is the option
of sending a photo of the moment of detection.
»
Call SIP:
if this option is selected, the camera will make a VoIP call when motion detection occurs. The VoIP number
called is configured in item
4.5. Services, in the SIP section.
»
Photo:
if this option is selected, the camera will take a picture and save it to the FTP server, SD card or NAS when motion
detection occurs. To set the photo storage location, see
5.5. Location, section FTP.
6.2. Audio detection
This camera supports audio detection. For this it needs the installation of an external microphone. Then you can define
actions in case of audio detection.
Audio Setting Configuration
»
Enable:
by clicking on the checkbox you enable the Audio Detection Enable function.
»
Intensity change:
when enabled, the triggering no longer depends on the configured threshold, but on the change in
the audio intensity.
»
Sensitivity:
sets the sensitivity of audio detection (0 to 100). The default is 50.
»
Threshold:
sets the threshold of the signal to be recorded as a real alarm (0 to 100). The default is 50.
»
Period:
the operating period is divided into weekdays, and for each day up to six periods with different time frames
can be created.
»
Stabilization:
when enabled, when audio is detected the camera will record a video of a set time frame.
»
Record:
when enabled, when audio is detected the camera will record a video of a set time frame.
»
Output:
when enabled, when audio is detected the camera will send an alarm signal to the alarm outputs.
»
Post-recording:
in this field the time that the camera will record after audio detection is finished is set. This value varies
from 10 to 300 seconds.
»
Send e-mail:
SMTP must be enabled. Identifies audio and sends via e-mail a picture of the moment when the audio
was detected.
»
PTZ: e
nables a predefined function (tour, preset, patrol).
»
Call SIP:
calls a SIP number to report the alarm.
»
Photo:
if this option is selected, the camera takes a photo at the moment of audio detection.
All changes must be saved.
