18
Intel
®
Storage System SSR316MJ2 Backplane Board
Install New Backplane Board
A.
Insert the new Intel
®
FMJBACKPLANE Backplane Board and sheet metal shroud
combined unit into the system. Align the holes on the bottom of the Backplane Board sheet
metal shroud onto the protruding blue pegs on the floor of the chassis. Snap the Backplane
Board and sheet metal shroud into place.
B.
Align the screw holes on the backplane board with the screws holes on the steel lip. Using a
Number 1 size Phillips Screwdriver, screw in the four Phillips screws into the steel lip and
the backplane board until the backplane board is installed. See Figure 11.
C.
Align the screw holes on the side of the chassis with the screws holes on the backplane
sheet metal shroud. Using a Number 1 size Phillips Screwdriver, screw in the two Phillips
screws into each side of the system until the backplane board is installed. See Figure 11.
Figure 11.
Installing the New Backplane Board in the System
