Intel
®
Storage System SSR316MJ2 Backplane Board
17
Remove Backplane Board from the System
A.
Using a Number 1 size Phillips Screwdriver, remove the two Phillips screws on each side of the
system that hold the backplane board to the side of the chassis. See Figure 10. Set these screws
aside. They will be re-installed later.
B.
Using a Number 1 size Phillips Screwdriver, remove the four Phillips screws from the steel lip
that holds the backplane board in place. See Figure 10. Set these screws aside. They will be re-
installed later.
C.
Carefully remove the backplane board from the storage system. Pay attention to sharp edges on
the backplane board. See Figure 10.
Figure 10. Removing the Backplane Board from the System
