Intel® RAID Controller SRCSASLS4I Hardware User’s Guide
15
Appendix A: Drive Roaming and Drive
Migration Install
Drive Roaming
Drive roaming occurs when the hard drives are changed to different ports on the same
controller. When the drives are placed on different ports, the controller detects the RAID
configuration from the configuration data on the drives.
Note: If you move a drive that is currently being rebuilt, the rebuild operation will restart, not
resume.
To use drive roaming:
1. Turn off the power to the system and all drives, enclosures, and system
components. Remove the power cord(s).
2. Follow the instructions that came with your server system to remove the server
cover.
3. Move the drives to different positions on the backplane to change the targets. See
your server documentation for instructions to install and remove drives.
4. Determine the target requirements.
5. Make sure the drives are inserted properly.
6. Follow the instructions that came with your server system to remove the server
cover.
7. Plug in and power on the system.
The controller detects the RAID configuration from the configuration data on the drives
(COD).
Summary of Contents for SRCSASLS4I - RAID Controller
