Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 118 / 234

98 Intel
®
Server System SR2600UR/SR2625UR Service Guide
5. Install the I/O expansion module filler panel(s) into the system back panel (see
letter “C” in Figure 89 ).
Figure 89. Removing the I/O Expansion Module from the Server System
6. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” on page 57 .
7. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 51 .
Installing and Removing the Intel
®
Remote
Management Module 3
Installing the Intel
®
RMM3
To install the Intel
®
Remote Management Module 3, follow these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 50 .
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 56 .
1-Socket
I/O Exp. Module
Standoff
Hole
2-Socket
I/O Exp. Module
Snap
Standoff
Server Board
I/O Connector 1
C
B
A
Filler Panels
AF003007