Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 71 / 234

Intel
®
Server System SR2600UR/SR2625UR Service Guide 51
Installing the PCI Riser Assembly
To install the PCI Riser Assembly, follow these steps:
1. Lower the riser assembly into place (see letter “A” in Figure 33 ).
2. Align the three hooks in the riser assembly with the matching slots at the back of
the server system (see letter “B” in Figure 33 ).
Figure 33. Installing PCI Riser Assembly into the Server System
3. Press down uniformly until the three hooks on the rear of the PCI riser assembly
engage the server system back panel slots. The riser cards will seat into the
matching sockets on the server board.
4. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
Hooks (3)
Server
Board
Riser
Socket
AF002968
Chassis Back Panel
Hook (3)
Riser
Socket
PCI
Riser
Assembly
B
Slot (3)
A