Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 70 / 234

50 Intel
®
Server System SR2600UR/SR2625UR Service Guide
Removing and Installing the PCI Riser Assembly
Removing the PCI Riser Assembly
To remove the PCI riser assembly, follow these steps:
1. Disconnect any cables attached to any add-in cards.
2. Grasp the riser assembly with both hands (see letter “A” in
Figure 33 ), and pull up
to release it.
3. Lift riser assembly straight up (see letter “B” in Figure 33 ).
Figure 32. Removing PCI Riser Assembly from the Server System
4. Do one of the following:
— If you need to add or replace a PCI add-in card, see “Installing and Removing a
PCI Add-in Card” on page 54 .
— If you need to add or replace a PCI riser card, see “Replacing a PCI Riser Card”
on page 52 .
— If you removed the PCI riser assembly for another procedure, continue with that
procedure.
Riser Card
Connector
AF002967
A
A
B