manualshive.com logo in svg

Intel S5500BC, User Manual

Share
Download
Intel S5500BC User Manual Download Page 40

20

Intel

®

 Server Board S5500BC User’s Guide

Installing a PCI Add-In Card

Peripherals and add-in cards are not included in your system and you must purchase them 

separately. The riser card at PCI slot 6 of the board supports a low-profile half-length PCI 

Express* add-in card. Refer to the “Intel

®

 SR1630BC System User Guide” for more 

detailed information on how to install a PCI card.

Installing a PCI Add-In Card

Note:

You must attach add-in cards to a riser card when the riser card is removed from the 

chassis.

1. Remove the screw that attaches the PCI bracket shield to the rear of the chassis to 

remove the shield. Retain the screw.

Figure 15. Removing the PCI Riser Assembly from the Server System

2. Insert the PCI card edge connector in the slot on the PCI riser.

Riser Card

Connector

          CAUTION:

Place the riser assembly 
upsidedown to avoid
damage to the riser
card connector.

AF003103

Summary of Contents for S5500BC























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands