manualshive.com logo in svg

Intel RAID High Availability, User Manual

Share
Download
Intel RAID High Availability User Manual Download Page 15

Intel

®

 High Availability Storage User Guide 

15 

 

Figure 7 Two-Server Intel

®

 RAID High Availability Storage Configuration 

Follow these steps to set up the hardware for a dual-server-JBOD configuration for Intel® RAID High 
Availability Storage clustering. 

1. Install an Intel

®

 RAID High Availability Storage controller board in each of the two server modules, 

following the instructions in the Quick Installation Guide. 

2. If necessary, install network boards in the two server modules and install the cabling between them. 

3. Install the two server modules and the JBOD enclosure in an industry-standard cabinet, following the 
instructions in the manufacturer documentation. 

4. Connect the host SFF-8088 connectors on the JBOD enclosure, or enclosures, to the SFF-8088 
connectors on the front of the two server modules. 

See Section 

Cabling Configurations

, for specific cabling instructions for one or two JBODs. 

Summary of Contents for RAID High Availability





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands