10
2-5-3 Installing the CrossFire /SLI Bridge Card
The following illustrations show you how to install the Bridge Card.
In order to activate the CrossFire/SLI technology, you have to install the optional
bridge card for your CrossFire /SLI Tech. Supported VGA Cards before you activating
the advance multi-GPUs functions.
Installation Reference
1. Install your VGA Cards in the PCI-E x16
slots.
2. Prepare with the Bridges with your
VGA Cards.
3. Be careful with the position for the pin you
would like to set up.
4. Keep straight to force the CF Bridges
plug into both sides of CrossFire Tech
Supported VGA Cards.
After the above installation completed, please connect display connectors
and VGA card independent power plug. Then refer to your graphics card
manual to install needed drivers and utilities needed for CrossFireX or
SLI function.
Notice!
The motherboard and graphics card illustrations are for reference use only.
We suggest that you install graphics cards in PE2 and PE3 slot for better
CrossFire performance.
