Intel P4304SC2SFEN, User Manual

Page: 12 / 18

8
General Installation Process
10b
Install PCI-e Card Assembly
(For P4304SC2SFEN and P4304SC2SHDR)
A
Remove the PCI slot shield by pushing the
shield out from inside the chassis.
From inside of chassis, press open the back
panel PCI add-in board retention device.
B C
While holding the PCI add-in board by its top edge or
upper corners, firmly press the add-in board into the
expansion slot.
D
Close the PCI add-in
board retention device.
Server
Board
A
Server
Board
B
Server
Board
C
D
Install Full-length PCI Card
4
5
For chassis with hotswap drive cage, remove the drive cage and the EMI cover, insert the fan assembly
(see letter “3a”), and then install the drive cage and EMI cover back.
Insert tabs on left side of the PCI Card
Guide into the slots in the chassis.
Fix the PCI Card Guide using two screws.
NOTE : The fan kit and PCI Card
Guide need to be ordered
seperately.
B
A
A
B
A
B
1
2
AF004726
3
a
Remove the PCI zone system fan.
1
For chassis that supports
fixed drive, insert the fan
assembly from the front
side of the chassis.
3
a
Assemble the fan using the fan kit.
2
Fan Kit for full-length
PCI Card
3
b
4
5
3b