Intel® Server System M20NTP1UR - System Integration and Service Guide
65
6.7
Riser Card Replacement
This section provides instructions for the replacement of a riser card. The instructions provided apply to
both riser card 1 and riser card 2.
Required Tools and Supplies
•
Intel riser card spare kit – iPC
M20NTP1URISER1
or
M20NTP1URISER2
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver
1.
Power off the system and disconnect all cables from the back of the system.
2.
Remove the system top cover (see
Section 6.1.1
).
3.
Remove the Air Duct (see
Section 6.2.1
4.
Remove the riser card assembly from the system (See
Figure 76. Riser Card Bracket Removal
•
Grasp the riser card assembly with both hands and carefully pull it up and away from the chassis.
5.
Remove the add-in card from the riser card (See
Figure 77. PCIe* Add-in Card Removal
Summary of Contents for M20NTP1UR
