Intel® Server System M20NTP1UR - System Integration and Service Guide
56
6.2
Air Duct Removal and Installation
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
6.2.1
Air Duct Removal
1.
Ensure the system is powered off and all cables are detached from the back of the system
2.
Remove the system top cover (see
Section 6.1.1
3.
Figure 58. Air Duct Removal
•
Lift the air duct straight up and away from the server system.
6.2.2
Air Duct Installation
To maintain proper air flow within the system, the air duct must be in place when the system is operating.
1.
Ensure cable channels on each side of the air duct are oriented towards the front of the system
2.
Figure 59. Air Duct Installation
•
Lower the air duct into the system, ensuring that all cables are clear from the installation area
•
The air duct is properly installed when it sits flat and is securely in place.
Summary of Contents for M20NTP1UR
