Intel® Storage Server System JBOD2000S3 Service Guide
15
2.9
Installing and Removing the Power Distribution Board
2.9.1
Removing the Power Distribution Board
1.
Disconnect the power cord, and unplug the PSU from the chassis.
2.
Disconnect all cables from the power distribution board and remember the connection locations.
3.
Remove the six screws from the power distribution board (see letter “A”).
4.
Lift the power distribution board from the JBOD system (see letter “B”).
Figure 29. Removing the Power Distribution Board
2.9.2
Installing the Power Distribution Board
1.
Place the power distribution board into the JBOD system (see letter “A”).
2.
Secure the power distribution board with six screws (see letter “B”).
Figure 30. Installing the Power Distribution Board
3.
Connect all cables back into the power distribution board connectors.
