Hardware Installations and Updates
Intel
®
Server System H2000WP Family Service Guide
39
Installing SAS 6G solution Option 2
Replacing Node Bridge Board
1.
The SAS controller module is provided as assembly with the bracket.
Figure 64. SAS Controller Assembly
2.
Remove pre-installed bridge board from node tray.
3.
Remove rear panel bracket. See letters A, B, C of the figure below
.
Figure 65. Removing the bridge board and rear bracket
4.
Align the plastic clip at the front of the board. See letter
A
of the figure below.
5.
Plug in the bridge board to bridge slot on baseboard. See letter
B
of the figure below.
6.
Fasten the screws located at
A
and
C
.
7.
Fix the SAS controller module to bridge board and riser slot 2 on baseboard (see letters D and
E).
8.
Fasten screws at F, G, and H to fix the rear bracket.
Summary of Contents for H2000WP
Page 14: ......
