Intel DQ33HS, Product Manual

Page: 15 / 82

Desktop Board Features
15
The Desktop Board supports the dual or single channel memory configurations defined
below.
• Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module
(DIMM) connectors with gold-plated contacts, 1.8 V only
• Support for:
⎯ Unbuffered, non-registered single or double-sided DIMMs
⎯ Non-ECC DDR2 memory
⎯ DIMM Type and Timings listed below:
Type Timing
DDR2-800 5-5-5 or 6-6-6 only
DDR2-667 5-5-5 only
⎯ Serial Presence Detect (SPD) memory only
⎯ Memory configurations listed below:
• Up to 2.0 GB utilizing 256 Mb technology
• Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
• Up to 8.0 GB utilizing 1 Gb technology
Related Links:
Go to the following links or pages for more information about:
• SDRAM specifications, http://www.intel.com/technology/memory/
• Installing memory, page 36 in Chapter 2
• PC Serial Presence Detect Specification ,
http://www.intel.com/technology/memory/ddr/specs/dda8c16_32x64ag_a.pdf
Intel
®
Q33 Express Chipset
The Intel Q33 Express Chipset consists of the following devices:
• Intel Q33 Express Chipset Graphics and Memory Controller Hub (GMCH) with Direct
Media Interface (DMI)
• Intel 82801IB I/O Controller Hub (ICH9) with DMI
The GMCH component provides interfaces to the processor, memory, PCI Express bus,
and the DMI interconnect. The component also provides integrated graphics
capabilities supporting 3D, 2D, and display capabilities.
ICH9 is a centralized controller for the board’s I/O paths.
Related Links:
Go to the following link for more information about the Intel Q33 Express Chipset:
http://developer.intel.com/products/chipsets/index.htm