Installing and Replacing Desktop Board Components
41
7.
Insert the bottom edge of the DIMM into the socket.
8.
When the DIMM is inserted, push down on the top edge of the DIMM until the
retaining clips snap into place. Make sure the clips are firmly in place.
9.
Replace the computer’s cover and reconnect the AC power cord.
Removing DIMMs
To remove a DIMM, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 27.
2.
Turn off all peripheral devices connected to the computer. Turn off the computer.
3.
Remove the AC power cord from the computer.
4.
Remove the computer’s cover.
5.
Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops
out of the socket.
6.
Hold the DIMM by the edges, lift it away from the socket, and store it in an
anti-static package.
7.
Reinstall and reconnect any parts you removed or disconnected to reach the DIMM
sockets.
8.
Replace the computer’s cover and reconnect the AC power cord.
Summary of Contents for DQ33HS
Page 1: ...Intel Desktop Board DQ33HS Product Guide Order Number E20672 001 ...
Page 45: ...Installing and Replacing Desktop Board Components 45 Figure 20 Connecting the IDE Cable ...
Page 62: ...Intel Desktop Board DQ33HS Product Guide 62 ...
