Figure 4.
Power Cord
Number 1 in the figure slides into the power holder and then can be plugged into a
power outlet.
The DC barrel connector, number 2 in the figure, connects to the back of the Target
on page 11, number 9.
If you need to detach the power plug from the power cradle, pinch the latch together
at the bottom of the power cradle and push the power plug up.
About this Guide
This guide is organized as follows:
•
Chapters 1 - 4: How to set up your Target Device, including connecting it to your
Host System.
•
Chapters 5 - 7: How to build your own runtime software and install it on your
Target Device.
•
The appendices provide information about:
— Using the Intel
®
IoT Gateway Knowledge Forum.
— Building an Intelligent Device Platform Project using Wind River Workbench.
— Using the Wind River Workbench to perform a Project Export / Import.
— Using the Triage Tool to aid in debugging.
— Installing and configuring PuTTY.
1.3
Introduction—Intel IoT Gateway Development Kit DK100 Series
Intel
®
IoT Gateway Development Kit DK100 Series
April 2015
Getting Started Guide
Order No.: 330307-007
13
