Intel D850EMV2L - Desktop Board Motherboard, Product Manual, Page: 46 / 78

Intel Desktop Boards D850EMD2 and D850EMV2 Product Guide
46
Peripheral Configuration Submenu
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
This submenu shown in Table 14 is used to enable onboard devices and USB legacy support.
Table 14. Peripheral Configuration Submenu
Feature Options Description
Serial Port A
•
Disabled
•
Enabled
•
Auto (default)
Configures serial port A.
Auto assigns the first free COM port, normally COM 1, the
address 3F8h, and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Base I/O address
(This feature is displayed
only if Serial Port A is set
to
Enabled. )
•
3F8 (default)
•
2F8
•
3E8
•
2E8
Specifies the base I/O address for serial port A, if serial
port A is set to
Enabled .
Interrupt
(This feature is displayed
only if Serial Port A is set
to
Enabled. )
•
IRQ 3
•
IRQ 4 (default)
Specifies the interrupt for serial port A, if serial port A is
set to
Enabled .
Serial Port B
•
Disabled
•
Enabled
•
Auto (default)
Configures serial port B.
Auto assigns the first free COM port, normally COM 2, the
address 3F8h, and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Base I/O address
(This feature is displayed
only if Serial Port B is set
to
Enabled. )
•
3F8
•
2F8 (default)
•
3E8
•
2E8
Specifies the base I/O address for serial port B, if serial
port B is set to
Enabled .
Interrupt
(This feature is displayed
only if Serial Port A is set
to
Enabled. )
•
IRQ 3 (default)
•
IRQ 4
Specifies the interrupt for serial port B, if serial port B is
set to
Enabled .
continued