manualshive.com logo in svg

Intel D850EMV2L - Desktop Board Motherboard, Product Manual, Page: 35 / 78

Share
Download
Intel D850EMV2L - Desktop Board Motherboard Product Manual Download Page 35

 

 

 

 

 35 

3  Updating the BIOS 

This chapter tells you how to update the BIOS by either using the Intel

®

 Express BIOS Update 

utility or the Intel

®

 Flash Memory Update Utility, and how to recover the BIOS if an update fails.   

Updating the BIOS with the Intel

®

 Express BIOS Update 

Utility 

With the Intel Express BIOS Update utility you can update the system BIOS while in the 
Windows

†

 environment.  The BIOS file is included in an automated update utility that combines 

the functionality of the Intel Flash Memory Update Utility and the ease-of use of Windows-based 
installation wizards.   

To update the BIOS with the Intel Express BIOS Update utility: 

1.  Go to the Intel World Wide Web site: 

http://support.intel.com/support/motherboards/desktop 

2.  Navigate to the D850EMV2 or D850EMD2 page and click the Express BIOS Update utility 

file for the Desktop Boards D850EMV2 or D850EMD2 BIOS. 

3.  Download the file to your hard drive.  (You can also save this file to a diskette.  This is useful 

if you are updating the BIOS for multiple identical systems.) 

4.  Close all other applications.  This step is required.  Your system will be rebooted at the last 

Express BIOS Update window. 

5.  Double-click the executable file from the location on your hard drive where it was saved.  This 

runs the update program. 

6.  Follow the instructions provided in the dialog boxes to complete the BIOS update. 

Updating the BIOS with the Intel

®

 Flash Memory Update 

Utility  

With the Intel Flash Memory Update Utility you can update the system BIOS from a floppy disk or 
other bootable media.  The utility available from the Web provides a simple method for creating a 
bootable flash memory update floppy that will automatically update your BIOS. 

Obtaining the BIOS Update File 

You can update to a new version of the BIOS by using the BIOS update file.  The BIOS update file 
is a compressed self-extracting archive that contains all the files you need to update the BIOS.  The 
BIOS update file contains: 

• 

New BIOS files 

• 

BIOS recovery files 

• 

Intel Flash Memory Update Utility 

Summary of Contents for D850EMV2L - Desktop Board Motherboard















































































Reviews:

No comments