Intel D850EMV2L - Desktop Board Motherboard, Product Manual, Page: 24 / 78

Intel Desktop Boards D850EMD2 and D850EMV2 Product Guide
24
Installing a Processor
CAUTION
Before installing or removing the processor, make sure that AC power has been removed by
unplugging the power cord from the computer; the standby power LED should not be lit (see
Figure 3 on page 18). Failure to do so could damage the processor and the desktop board.
To install a processor, follow these instructions:
1. Observe the precautions in “Before You Begin” on page 21.
2. Locate the processor socket and raise the socket lever completely.
3. Install the processor so that the corner with the triangle marking (A) is aligned with the corner
of the socket where the lever connects to the socket (see Figure 7).
4. Lower the lever to its original position.
OM12078
mPGA478B mPGA478B mPGA478B
A
Figure 7. Installing a Processor
5. For instructions on how to install the processor fan heatsink, refer to the boxed processor manual
or the Intel World Wide Web site at:
http://support.intel.com/support/processors/pentium4/intnotes478.htm
6. Connect the processor fan cable to the processor fan connector (see Figure 8).
OM13637
Figure 8. Connecting the Processor Fan Cable to the Processor Fan Connector