Intel D845PESV Product Manual Download Page 8

Page: 8 / 78

Intel Desktop Board D845PESV Product Guide

Table 1.

Feature Summary (continued)

Peripheral Interfaces

•

Up to six USB 2.0 ports

— Four ports routed to the back panel

— Two ports routed to the front panel USB header

•

Two IDE interfaces with Ultra DMA-33 and ATA-66/100 support

•

One diskette drive interface

•

One parallel port

•

One serial port

•

PS/2

†

keyboard and mouse ports

Expansion Capabilities

— Six PCI bus add-in card connectors

— One AGP connector

BIOS

•

Intel/AMI BIOS

•

4 Mbit symmetrical flash memory

•

Support for SMBIOS

Power Management

•

Support for Advanced Configuration and Power Interface (ACPI)

•

Suspend to RAM (STR) support

•

Wake on USB, PCI, RS-232, PS/2, LAN, and front panel

Hardware Management

Hardware monitor with:

•

Three fan sensing inputs used to monitor fan activity

•

Remote diode temperature sensing

•

Intel

Precision Cooling fan speed control that automatically adjusts chassis

fan speeds based on system temperature

•

Voltage sensing to detect out of range values

✏

NOTE

For information about Intel desktop boards, including technical product specifications, BIOS
updates, and device drivers, go to the Intel World Wide Web site at:

http://support.intel.com/support/motherboards/desktop/

Summary of Contents for D845PESV















































































Search results

Summary of Contents for D845PESV

Reviews:

Intel D845PESV, Product Manual, Page: 8 / 78

Search results

Summary of Contents for D845PESV

Reviews: