Intel D845PESV Product Manual Download Page 61

Page: 61 / 78

Using the BIOS Setup Program

Boot Menu

Maintenance

Main

Advanced

Security

Power

Boot

Exit

The menu shown in Table 26 is used to set the boot features and the boot sequence.

Table 26. Boot Menu

Feature Options

Description

Silent Boot

•

Disabled

•

Enabled (default)

Disabled displays normal POST messages.

Enabled displays OEM logo instead of POST messages.

Intel

Rapid BIOS Boot

•

Disabled

•

Enabled (default)

Allows BIOS to skip certain tests while booting.

Scan User Flash Area

•

Disabled

•

Enabled (default)

Enables the BIOS to scan the flash ROM for user binary
files that are executed at boot time.

PXE Boot to LAN

•

Disabled (default)

•

Enabled

Disables or enables PXE boot to LAN.

USB Boot

•

Disabled

•

Enabled (default)

Disables or enables booting to USB boot devices.

Boot Device Priority

No options

Specifies the boot sequence from the available types of
boot devices.

Hard Disk Drives

No options

Specifies the boot sequence from the available hard
disk drives.

Removable Devices

No options

Specifies the boot sequence from the available removable
devices.

ATAPI CD-ROM Drives No options

Specifies the boot sequence from the available ATAPI
CD-ROM drives.

Summary of Contents for D845PESV















































































Search results

Summary of Contents for D845PESV

Reviews:

Intel D845PESV, Product Manual, Page: 61 / 78

Search results

Summary of Contents for D845PESV

Reviews: