manualshive.com logo in svg

Intel D845PESV, Product Manual, Page: 13 / 78

Share
Download
Intel D845PESV Product Manual Download Page 13

Desktop Board Features 

 

 

13 

Input/Output (I/O) Controller  

The SMSC LPC47M172 or National Semiconductor PC87372 super I/O controllers feature the 
following: 

• 

Low pin count (LPC) interface 

• 

Two serial ports (one via a board connector) 

• 

One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port  
(EPP) support 

• 

Serial IRQ interface compatible with serialized IRQ support for PCI systems 

• 

PS/2-style mouse and keyboard interfaces 

• 

Interface for one 1.2 MB, 1.44 MB, or 2.88 MB diskette drive 

• 

Intelligent power management, including a programmable wake up event interface 

• 

PCI power management support 

• 

Two fan tachometer inputs 

Audio Subsystem  

The audio subsystem features the following: 

• 

Intel 845PE chipset (AC ’97)   

• 

Analog Devices Inc. AD1981B audio codec  

✏

 

NOTE 

The line out connector, located on the back panel, is designed to power either headphones or 
amplified speakers only.  Poor audio quality may occur if passive (non-amplified) speakers are 
connected to this output. 

Audio drivers and utilities are available from Intel’s World Wide Web site: 

http://support.intel.com/support/motherboards/desktop/ 

LAN Subsystem (Optional) 

The optional Intel 82562ET (with the Intel 82801DB ICH4) provides a Fast PCI LAN subsystem 
providing both 10Base-T and 100Base-TX connectivity.  The Intel 82562ET provides the 
following functions: 

• 

Basic 10/100 Ethernet LAN connectivity 

• 

Supports RJ-45 connector with status indicator LEDs 

• 

Programmable transit threshold 

• 

Configurable EEPROM that contains the MAC address 

LAN Subsystem Software 

For LAN software and drivers, refer to the D845PESV link on Intel’s World Wide Web site at: 

http://support.intel.com/support/motherboards/desktop 

Summary of Contents for D845PESV















































































Reviews:

No comments