Intel Desktop Board D810E2CA3 Technical Product Specification
102
Table 72. Boot Menu (continued)
Feature Options
Description
IDE Drive
Configuration
No Options
Configures IDE drives. When selected, displays the IDE
Drive Configuration submenu.
Notes:
1.
ARMD-FDD = ATAPI removable device - floppy disk drive
2.
ARMD-HDD = ATAPI removable device - hard disk drive
3.
UNDI = Universal Network Interface Card (NIC) Driver Interface
PXE = Pre-boot eXecution Environment
4.8 Exit
Menu
To access this menu, select Exit from the menu bar at the top of the screen.
Maintenance
Main
Advanced Security
Power
Boot
Exit
The menu represented in Table 73 is used to exit the Setup program, saving changes, and loading
and saving defaults.
Table 73. Exit Menu
Feature Description
Exit Saving Changes
Exits and saves the changes in CMOS SRAM.
Exit Discarding Changes
Exits without saving any changes made in the Setup program.
Load Setup Defaults
Loads the factory default values for all the Setup options.
Load Custom Defaults
Loads the custom defaults for Setup options.
Save Custom Defaults
Saves the current values as custom defaults. Normally, the BIOS reads the
Setup values from flash memory. If this memory is corrupted, the BIOS
reads the custom defaults. If no custom defaults are set, the BIOS reads
the factory defaults.
Discard Changes
Discards changes without exiting the Setup program. The option values
present when the computer was turned on are used.
