Intel CORE 2 DUO E4000 - 3-2008 Datasheet Download Page 115

Page: 115 / 122

Datasheet

115

Balanced Technology Extended (BTX) Boxed Processor Specifications

8.1.3

Boxed Processor Support and Retention Module (SRM)

The boxed processor TMA requires an SRM assembly provided by the chassis

manufacturer. The SRM provides the attach points for the TMA and provides structural

support for the board by distributing the shock and vibration loads to the chassis base

pan. The boxed processor TMA will ship with the heatsink attach clip assembly, duct

and screws for attachment. The SRM must be supplied by the chassis hardware vendor.

See the Support and Retention Module(SRM) External Design Requirements Document,

Balanced Technology Extended (BTX) System Design Guide, and the appropriate

Thermal and Mechanical Design Guidelines (see

Section 1.2

) for more detailed

information regarding the support and retention module and chassis interface and

keepout zones.

Figure 44

illustrates the assembly stack including the SRM.

Figure 44.

Assembly Stack Including the Support and Retention Module

T he rm a l M od u le A ssem bly

• H ea tsin k & Fan
• C lip
• S tructural D uct

M othe rboard

S R M

C ha ssis P an

Summary of Contents for CORE 2 DUO E4000 - 3-2008



























































































































Search results

Summary of Contents for CORE 2 DUO E4000 - 3-2008

Reviews:

Related manuals for CORE 2 DUO E4000 - 3-2008

Brands by name

Popular brands

Intel CORE 2 DUO E4000 - 3-2008, Datasheet

Search results

Summary of Contents for CORE 2 DUO E4000 - 3-2008

Reviews:

Related manuals for CORE 2 DUO E4000 - 3-2008

Brands by name

Popular brands