Intel CMCN1CC, Integration Manual, Page: 9 / 84

7
Install Storage
First, remove the screw from the
threaded standoff.
NOTE: M.2 Slot will only support NVMe SSDs.
Insert the M.2 card into the connector
at an angle as shown. Take caution
to properly align the notch on
the M.2 card with the key in
the connector to reduce
risk of damage.
Push the M.2 card down and re-install
screw into standoff to secure.
Do not add or remove storage with the power on. Always turn off the
power and unplug the power cord from the system before adding or
removing storage. Otherwise, the system could be damaged.
2
1
3
Plug in the battery.