Intel CMCN1CC, Integration Manual, Page: 10 / 84

8
Install Back Cover
Do not remove or replace the bottom cover with the power on. Always turn off
the power and unplug the power cord from the system before removing or
replacing the bottom cover. Otherwise, the system could be damaged.
The bottom cover is held in place by 9 tabs that must be engaged to install the
bottom cover. Tab locations and order to be engaged are shown below.
Installing the bottom cover without fully engaging the 9 tabs may damage the
bottom cover.
To install the bottom cover of the laptop, slide the cover into place at the front
and engage tabs 1 and 2. Lower the cover and engage the remaining
tabs on the edges and rear of the laptop, starting with the tabs closest to the
front of the laptop and moving backwards.
9
5
3
4
1
2
8
7
6
7
5
9
3
1
4
2
6
8