Intel BX80623G530 Specification Download Page 45 | Manualshive

Page: 45 / 64

background image



Specification Update

45

BJ81.

Execution of BIST During Cold RESET Will Result in a Machine Check

Shutdown

Problem:

If BIST (Built In Self-Test) is enabled and a Cold RESET follows, an unrecoverable
machine check shutdown will occur.

Implication:

Due to this erratum, BIST cannot be enabled.

Workaround:

None identified.

Status:

For the steppings affected, see the Summary Tables of Changes.

BJ82.

PCI Express* Differential Peak-Peak Tx Voltage Swing May Violate the

Specification

Problem:

Under certain conditions, including extreme voltage and temperature, the peak-peak
voltage may be higher than the specification.

Implication:

Violation of PCI Express Base Specification of the VTX--DIFF-PP voltage. No failures
have been observed due to this erratum.

Workaround:

None identified. Sugar Bay and Bromolow-WS

Status:

For the steppings affected, see the Summary Tables of Changes.

BJ83.

PCIe* Presence Detect State May Not be Accurate After a Warm Reset

Problem:

Under certain conditions, when there is no PCIe device present, the status of Presence
Detect State bit (SLOTSTS Device 1; Function 0,1,2; Offset BAH; bit [6] and/or Device
6; Function 0; Offset BAH; bit [6]) may not be accurate after a warm reset.

Implication:

The Presence Detect State bit may incorrectly report a PCIe device is present even
though no device is actually present, which may result in a system hang.

Workaround:

A BIOS code change has been identified and may be implemented as a workaround for
this erratum.

Status:

For the steppings affected, see the Summary Tables of Changes.

BJ84.

Display Corruption May be Seen After Graphics Voltage Rail

(VCC_AXG) Power Up

Problem:

Powering up the processor graphics logic in the cases of initial poweron or Sx resume
state power up may cause a nondeterministic state in the processor graphics logic.

Implication:

This erratum may cause improper 3D rendering and may result in display corruption.

Workaround:

A graphics driver workaround has been identified and may be implemented as a
workaround for this erratum.

Status:

For the steppings affected, see the Summary Tables of Changes.

«
...
43
44
45
46
47
...
»

Summary of Contents for BX80623G530

































































Reviews:

No comments

Related manuals for BX80623G530

Brand: 2N Pages: 11

Brand: 2N Pages: 5

Brand: 2N Telekomunikace Pages: 24

Brand: Paradyne Pages: 112

Brand: Compaq Pages: 112

Brand: Rolls Pages: 2

Brand: Roland Pages: 12

Brand: Orban Pages: 255

Compact Emulator M30620T-CPE

Brand: Renesas Pages: 52

Brand: ROE Pages: 41

Brand: Cypress Semiconductor Pages: 16

Brand: Cameo Pages: 23

Brand: Airlink101 Pages: 46

Brand: Alarm Pages: 5

Disc Publisher XR

Brand: Primera Pages: 2

Brand: Rainbow Pages: 2

Brand: Intercoax Pages: 2

Brand: QTech Pages: 406

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands