51
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . .
Troubleshooting
6
This chapter addresses some of the most common problems people have
with their AnyPoint™ Wireless II Network. If the information you need is
not here, check the AnyPoint Wireless II Network Online Support site at:
www.intel.com/anypoint/support/
I can’t see a network PC from another PC
First, make sure both PCs are turned on, and that the network adapters’
hardware and software are correctly installed. Follow these steps in order.
Make sure the adapters and cables are installed correctly
For information about installation and cables, refer to the Installation
Guide (the poster that came with your adapter).
Make sure you are logged on to the network
Restart all the PCs on the network. When Windows* restarts, the
Enter
Network Password
screen may appear, depending on your previous system
settings. If it does appear, type a new user name (or accept the default),
create a password (optional), and then click
OK
.
See page 15 for more information on user names and network passwords.
Make sure the PCs on the network are in the same workgroup
To verify work group settings:
1
Click
Start > Settings > Control Panel
.
2
Double-click
Network
.
3
Click the
Identification
tab.
4
Change the
Workgroup
setting to the same name on all PCs.
Do not click Cancel!
If you click Cancel, you will
not be on the network.
