Intel Active Management Technology v5.0 Administrator'S Manual Download

Page: 110 / 143

A number

A special (nonalphanumeric) character, such as !, $, or ; excluding the :, ", and , characters.)

The underscore ( _ ) and spacebar are valid password characters but do NOT add to the password complexity.

5. Change the password to establish Intel AMT ownership.

The computer then goes from the factory-default state to the setup state.

6. Select

Intel ME Configuration

, and then press <Enter>.

ME Platform Configuration

allows you to configure ME features such as power options, firmware update capabilities,

and so on.

Summary of Contents for Active Management Technology v5.0
















































































































































Search results

Summary of Contents for Active Management Technology v5.0

Reviews:

Related manuals for Active Management Technology v5.0

Brands by name

Popular brands

Intel Active Management Technology v5.0, Administrator'S Manual

Search results

Summary of Contents for Active Management Technology v5.0

Reviews:

Related manuals for Active Management Technology v5.0

Brands by name

Popular brands