Intel 815 Micro-ATX Mainboard
iii
SOMETHING IMPORTANT !
¶
TRADEMARKS
All trademarks used in this manual are the property of their respective owners.
¶
LOAD OPTIMIZED DEFAULTS
“LOAD OPTIMIZED DEFAULTS” will have the BIOS default settings loaded into
the CMOS memory. These default settings will optimize system performance and
system stability. Load the setup default is recommended when you receive this
mainboard or when the system CMOS data is corrupted. Refer to Section 4.12 for the
procedures.
¶
DISCHARAGE CMOS DATA
Whenever you want to discharge the CMOS data or open the system chassis, Make
sure to disconnect the AC power first because there is always the 5V standby voltage
active in the PC system. Without disconnecting the AC power connector from the PC
system, the mainboard can be damaged by improper operation .
¶
WAKE ON LAN
In order to support the onboard Wake On LAN feature, the system requires a special
Switching Power Supply, Such power supply must be able to provide at least 1A of
driving capability on the “5V standby” voltage.
¶
WARNING !
The "Static Electricity" may cause damage to the components on the mainboard, In
order to avoid the damage to the mainboard accidentally, please discharge all static
electricity from your body before touching this mainboard.
¶
NOTICE
Information presented in this manual has been carefully checked for reliability;
however, no responsibility is assumed for inaccuracies. The information contained in
this manual is subject to change without notice.
IMPORTANT NOTICE:
This mainboard supports the ACPI function and there is the
standby voltage always active all the time. (when the system power is
off, there is still the standby voltage active scanning the wake up
event) Whenever you are installing any component onto the
mainboard.
- BE SURE TO DISCONNECT THE POWER CABLE.