32
8
Microphone Operation
now adjust selector knob or microphone [ UP/DOWN ] key to select
the desired channel.
REV
: In standby, press the key programmed
as "REV" function to turn ON/OFF the
Frequency Reverse function.
HOME
: HOME channel switch. In standby press the key programmed
as "HOME" function to switch between
Home channel or current channel.
MAIN
: Main band switch. In standby press the key programmed as
"MAIN" function to cho ose left band or right
band as Main band.
VFO/MR
: Working mode switch. In standby, press the key programmed
as "VFO/MR" function to switch between
channel mode and frequency mode.
SCAN
: scan function in standby. Press the
key programmed as "SCAN" function to start
channel scan or frequency scan.
SQL
OFF
:Turn off Squelch. In standby, press the key programmed as
"SQL OFF" function to turn off squelch; you
can hear very weak signal. Repeat the above
function to turn ON squelch.
TBST
: Transmit tone burst. In standby,
press the key programmed as "TBST" function
to transmit selected tone burst. This function is use to wake sleeping
repeater.
CALL
OUT
: Calling, in standby, press the key programmed as "CALL
OUT" function to transmit pre-programmed
DTMF, 2-TONE or 5-TONE codes.
COMP
: Compander function. In standby ,
press the key programmed as "COMP" to turn
ON or OFF the Compander function.
SCR
: Scrambler function. In standby, press the key programmed as
"SCR" function to turn ON/OFF the Scrambler function.
Select optional Scrambler groups (from 9 fixed
groups and 2 self-defined groups).
TONE DEC
: Add optional signaling. In stand-by press the key
programmed as "TONE DEC" function to select
DTMF (DT), 2-TONE (2T), 5-TONE (5T) or
OFF (function disabled).
W/N
: Wide narrow band setup. In standby,
press the key programmed as "W/N" function
to select Wide Band, Middle Band or Narrow Band.
OFF
: No function.
