30
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No. 56 menu. The LCD displays "
PASSWD
"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
ON
: Turn on password function.
OFF
: Turn off password function.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
PASSWORD FUNCTION
When this function is enabled, a correct password must be inserted after power
ON radio. The password must be programmed before using this function.
7
General Setting
NOTE
BEEP VOLUME CONTROL
Press
1.
key to enter function menu.
Turn the Main band selector knob to choose No. 53 menu. The LCD
2.
displays "
BP-VOL
"
Press the Main band selector knob to enter function setup
3.
Switch the Main band selector knob to
4.
choose wanted value.
LOW
: BEEP volume is low.
HIGH:
BEEP volume is high.
Press the Main band selector knob or
5.
key to store value and
back to function menu.
Switch the Main band selector knob to choose wanted value.
4.
INT
: Internal speaker, VHF and UHF bands share one speaker.
EXT
: External speaker.
Press the Main band selector knob or
5.
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Only VHF communications can be
heard through the external speaker.
TALK AROUND
With this function on, the transceiver will not able to communicate
with another transceiver through a repeater.
1. Press
key to enter function
menu.
2
.
Turn the Main band selector knob to
select No. 54 menu. The LCD display
will show
"TALK"
indication.
3. Press the Main band selector knob to enter
function setup.
4. Switch the Main band selector knob to choose wanted value
ON:
Function enabled
OFF:
function disabled
5. Press the Main band selector knob or
key to store value
and back to function menu.
Press
key or hold selector knob for over 0.5 second to
store setup and exit.
MICROPHONE SPEAKER
1. Press
key to enter function menu.
2
.
Turn the Main band selector knob to choose No 55 menu. The LCD
displays
"HND SPK".
3. Press the Main band selector knob to enter function setup.
4. Switch the Main band selector knob to choose wanted value :
HSPKOFF
: Microphone Speaker disabled
HSPK ON
: Microphone Speaker enabled
MSPKOFF
: Main Speaker disabled
5
.
Press the Main band selector knob or
key to store value and back to
function menu.Press
key or hold
selector knob for over 0.5 second to store setup and exit.
