20
7
General Setting
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 14 menu. The LCD displays "
DTMF S
"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value.
4.
30MS:
The time for transmit a single DTMF encode and the interval is 30MS,
50MS:
The time for transmit a single DTMF encode and the interval is 50MS,
80MS:
The time for transmit a single DTMF encode and the interval is 80MS,
100MS:
The time for transmit a single DTMF encode and the interval is 100MS,
150MS:
The time for transmit a single DTMF encode and the interval is 150MS,
200MS:
The time for transmit a single DTMF encode and the interval is200MS,
250MS:
The time for transmit a single DTMF encode and the interval is 250MS,
Press the Main band selector knob or
5.
key to store value and back to
function menu. Press
key or hold selector knob for over 0.5
second to store setup and exit.
Press
1.
to enter function menu
Switch the Main band selector knob to
2.
choose No 15 menu, the LCD displays
DTMF W
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose DTMF group. Then
4.
press
key back to DTMF menu.
Press PTT will transmit with selected
DTMF code.
06-16:
total 16 group of DTMF code.
DTMF ENCODE TRANSMITTING TIME
DTMF ENCODE SETUP
When the selected group is empty, the
5.
LCD displays "------"
Press the selector knob to enter the DTMF signaling edit. The LCD
6.
display "-- -- -- -- -- --", the last character flashes
Switch the selector knob to choose wanted character. Press the
7.
selector knob to confirm selected value and start edit for next
character.
Press
8.
key to store value and exit code editing. Press
key
again to store setup and exit. Press
key or hold selector knob
for over 0.5 second to store setup and exit.
This transceiver has 5 squelch modes available. Squelch function is
used for increase the level of filtering unwanted signal, and free from
disturb.
Press
1.
key to enter function menu.
Turn the Main band selector knob to
2.
choose No 16 menu. The LCD displays "
SGN SQL
"
Press the Main band selector knob to enter function setup.
3.
Switch the Main band selector knob to choose wanted value
4.
SQ:
You can hear the calling once receives matching carrier.
CTSS/
D
CS:
You can hear the calling when receives matching carrier
and CTCSS/DCS code.
CT*TO:
You can hear the calling when receives matching c
optional signaling.
TONE:
You can hear the calling when
receives matching c CTCSS/DCS + optional
signaling.
CT/TO:
You can hear the calling when receives any matching carrier
or CTCSS/DCS or optional signaling.
SQUELCH MODE SETUP
7
