background image

!

Two Independent Weighing Channels ____

 

ED2E-Elite-2X                                                                                                          

SkidWeigh system with two independent weighing channels 

- LCD display showing Mode 8 is representing first independent weighing channel  

                                            

- LCD display showing Mode 82 is representing second independent weighing channel

 

Mode

 8

 is the first weighing channel  

       

                                                                                                          

By pressing two weighing channels switch indication on LED display will change to Mode

 82 

   

    

                                  

Note:  

                                                                                                                                                           

The calibration procedure is the same for the second weighing channel, indicated on LED display as Mode 

82

.

                          

Integrated Visual Data Technology Inc.,   3439 Whilabout Terrace, Oakville, Ontario, Canada  L6L 0A7

    

Two Independent  

Weighing Channels Switch

Summary of Contents for DL2-E Dura-Lift













Reviews: