72
FlashPoint 128 ImagePro Plus
™
Driver
The FlashPoint 128 ImagePro Drivers allow the FlashPoint 128 board to be
used in conjunction with the Media Cybernetics ImagePro Plus image
processing software versions 1.3, 2.0 and 3.0. Please refer to the ReadMe file
(FPVIPRO.TXT) for instructions on installing this driver. This file is located
on the hard drive in the \ipro directory.
Installation for ImagePro 3.0
For the 32 bit version, copy \FLASHPT\IPRO\V30\CAPTFB32.DLL into
the directory where ImagePro 3.0 is installed.
For the 16 bit version, copy \FLASHPT\IPRO\V30\CAPT_FB.DLL into
the directory where ImagePro 3.0 is installed.
Run ImagePro 3.0 and select Setup Acquire from the Acquire menu.
Select FlashPT/16 or FlashPT/32 from the Current Driver box.
For additional information
on the Image-Pro software,
contact Media Cybernetics
at (800) 992-4256 or visit
their web site at http://
www.mediacy.com.
Summary of Contents for FlashPoint 128 CPCI
Page 2: ...2...
Page 58: ...Special Drivers Chapter 6...
Page 77: ...Appendix A...
Page 88: ...Appendix B...
