54
Recording a source
Of course the DTR-9.1 can also be used to record an
input source media. This allows you to make copies of
the music or videos you like, copy them from one type
of media to another, or even record what is being
broadcast on television or radio. Be aware that the Rec
Out and Zone 2 buttons use the same circuit so that you
cannot make recording and output to the remote zone
(Zone 2) at the same time.
To record the input source signal you are
currently watching or listening to
This method outputs to the audio and video outputs the
currently selected input source signal. This method
allows you to a signal while you are actually listening to
or watching it.
1. Select the input source to record by pressing
the corresponding input selector button.
The input source is now selected and you may
watch or listen to it as desired.
2. Press the Rec Out button twice within 8
seconds.
Pressing the Rec Out button twice outputs the cur-
rently selected input source signal to the TAPE 1
OUT, TAPE 2 OUT, VIDEO 1 OUT, and VIDEO 2 OUT
outputs for recording. The indicator above the se-
lected input source lights red.
3. Start recording at the recording component
as desired.
To confirm the settings, press the Rec Out button.
The current settings will appear for 8 seconds in the
front display.
Notes:
• If you change the input source during recording,
you will record the signals from the newly selected
input source.
• You cannot record the surround effects.
• Digital signals input to the DIGITAL INPUT (COAXIAL)
and DIGITAL INPUT (OPTICAL) inputs will be output to
the DIGITAL OUTPUT (COAXIAL) and DIGITAL OUTPUT
(OPTICAL) outputs.
• Digital input signals are only output to the digital
outputs and analog input signals are only output
from the analog outputs. There is no conversion
from digital to analog or vice versa. When connect-
ing CD players and other digital components, do
not connect only the digital terminals, but the ana-
log ones as well.
• There are some restrictions on recording digital sig-
nals. When making digital recordings, consult the in-
struction manual that came with your digital record-
ing equipment (e.g., MD recorder or DAT deck) to
know what restrictions are imposed.
• You cannot record the source connected to the
MULTI CHANNEL INPUT connector.
Off
On
Standby/On
Standby
Display
DVD
Video
1
Video
2
Video
3
Video
4
Video
5
Tape
1
Tape
2
AM
FM
Phono
C D
Open/Close
Phones
CLEAR
Zone
2
(
)
GRN
Rec
(
)
RED
Power
Master Volume
DTR-9.1
Rec Out
Input selector buttons
