En-
24
Listening to the Radio
—Continued
Presetting AM/FM Stations
You can store up to 40 of your favorite AM/FM radio
stations as presets.
Presetting FM/AM stations is performed by the receiver.
1
Tune to the AM/FM station that you want to
store as a preset.
2
Press the [Memory] button.
The preset number flashes.
(Actual display depends on the country.)
3
While the preset number flashes (about 8
seconds), use the PRESET [
]/[
] buttons
to select a preset from 1 through 40.
4
Press the [Memory] button again to store
the station or channel.
The station or channel is stored and the preset
number stops flashing.
Repeat this procedure for all of your favorite AM/
FM radio stations.
■
Selecting Presets
To select a preset, use the number buttons on
the remote controller, the remote controller’s
CH/Album [+]/[–] buttons or the receiver’s
Preset [
]/[
] buttons.
■
Deleting Presets
1
Select the preset that you want to delete.
See the previous section.
2
While holding down the [Memory] button,
press the [Tuning Mode] button.
The preset is deleted and its number disappears
from the display.
■
Name Edit
You can enter a custom name for radio preset for easy
identification. When entered, the custom name will
appear on the display.
The custom name is edited using the character input
screen.
1
Press the [Setup] button on the remote
controller.
2
Use the arrow [
]/[
] button to select
“2. Source Setup,” and then press [Enter].
3
Use the arrow [
]/[
] button to select
“Name Edit,” and then press [Enter].
4
Use the arrow [
]/[
]/[
]/[
] button to
select a character, and then press [Enter].
Repeat this step to enter up to 10 characters.
CH/Album +/–
Display
Setup
Return
Enter
&(#5
Memory
Tunin
g
Mode
Tunin
g
F
/
H
,
Preset
C
/
U
Return
Setup
Number
buttons
