En-
19
Enjoying Audio Sources
1
Rotate the receiver’s [Input] selector, or
press the remote controller’s Input Selector
buttons to select the source you want to
hear.
2
Use the [Speaker A] and [Speaker B]
buttons on the receiver to select the
speaker set that you want to use.
The A and B speaker indicators show whether each
speaker set is on or off.
3
Start playback on the selected component.
4
To adjust the volume, use the receiver’s
[Master Volume] control, or the remote
controller’s Volume [
]/[
] buttons.
Turn the control clockwise to turn up the volume or
counterclockwise to turn down the volume.
You can temporarily mute the output of the receiver.
Press the remote controller’s [Muting] button.
The receiver is muted.
To unmute the receiver, press the [Muting]
button again.
Note:
The Mute function will be cancelled if the remote
controller’s [Volume] buttons are pressed or the receiver
is set to Standby.
You can connect a pair of stereo headphones (1/4-inch
phone plug) to the receiver’s Phones jack for private
listening.
Notes:
• Always turn down the volume before connecting your
headphones.
• While the headphones plug is inserted in the Phones
jack, the speakers are turned off.
• If you connect an iPod or iPhone to the USB port on
this device, no sound will be output from the
headphones jack.
Master Volume
Input
Phones
Input
Selector
Volume
F
/
H
Mutin
g
Speaker A, B
A,B Indicators
Muting the Receiver
(remote controller only)
Using Headphones
