QUICK START GUIDE
PN
：
320-0205
REV: P02
5 / 8
Auto Bed Leveling
STEP 1:
Verify the auto leveling sensor is
healthy. Go back to the main menu, click
“Settings”
→
“Other Setting
s
”
→
“Test”
→
”Leveling sensor”. The nozzle
will be heated up. Wait for approx. 2
minutes, follow the instruction on the
screen, use a removal tooling to touch the
hot nozzle, and then lift the nozzle
approx.1mm up. It will show message “The
leveling sensor is triggere
d”.
NOTE:
IF the leveling sensor doesn’t
work, do not perform the auto
leveling function, the nozzle may
break the glass!
NOTE
:
Do not touch the hot nozzle to avoid burns
.
STEP 2
: Go back to the main menu, and
click “Buildplate”
→
“Level
-Sensor
Calibrate”. Follow the instruction to
complete the calibration. The nozzle
heating temperature depends on the
selected material.
