20
Implementation and Configuration INSYS WLAN bridge
its own MAC address as response and saves IP and MAC of the device “behind” it in a
table.
With this, the INSYS WLAN bridge virtually passes itself off as the required end device
and thus receives all packets which were meant for the end device. These packets are
then forwarded to the end device “behind” the INSYS WLAN bridge .
5.5 Firmware
Update
This page will enable you to update the firmware of the INSYS WLAN bridge in a simple
way.
Click on the button “Browse” to select a firmware update file (in general “update.hex”)
from a local directory. Press the button “Here” to load this firmware into the INSYS WLAN
bridge
.
This process takes approximately 30 seconds. Afterwards the INSYS WLAN bridge is
restarted. After a firmware update the device is reset to the default factory settings.
version 1.01 / 10.04