Remote Configuration with EASY-SOFT and INSYS
C
t
INSYS GSM 4.3 easy
6
Remote Configuration with EASY-SOFT and INSYS
Connect
In the supplied software EASY-SOFT by Moeller, no functionality is designed for remote
configuration.
The INSYS GSM 4.3 easy therefore includes the program “INSYS Connect”, which initiates
the connection setup to a remote INSYS GSM 4.3 easy. A compact controller Moeller easy
is connected to this device.
For the connection setup, a communication device (e.g. analogue modem, ISDN TA or
GSM Modem) is required locally. Any of these devices can be used to establish a connec-
tion to the remote INSYS GSM 4.3 easy via a dial up connection. When the connection is
established, INSYS Connect will retreat from the serial interface. The communication de-
vice connected to this serial interface now has no connection to another program, but
maintains the connection. The program EASY-SOFT can now be started and program the
easy device as if it was connected to a local serial port. The serial interface, to which the
communication device with the data connection to the remote INSYS GSM 4.3 easy is
connected, is used for this process.
PC
Modem /
ISDN-TA /
GSM
public phone network
INSYS
GSM easy
Moeller
easy
Figure 7: Principal connection of the (INSYS GSM 4.3 easy to the Moeller easy
Please note
:
To perform the remote configuration, the waiting period in EASY-SOFT must be adjusted.
Otherwise, EASY-SOFT doesn’t wait long enough for the response of the addressed easy
device. This device is not located at the local serial port, but the communication takes
place via the GSM network. The response times are delayed due to the transmission link.
Depending on the quality of the connection, the waiting period for the communication
set up must be increased more or less.
22
