Operating Principle
INSYS GSM 4.3 easy
4.2
Configure Monitoring
Clicking the button “Configure” displays the special configuration of the function. The
table is not used to enter data, but to visualize the configuration. The entry takes place
below the table.
Selecting the monitoring line in the configuration window is done either with the selec-
tion box “No.” or by double-clicking the according line in the alias table.
Figure 4: Software HSComm - Configure monitoring window
The displayed settings are only effective when monitoring is turned on in
the main window!
Settings from 1 to 255 seconds are possible for the monitoring interval.
Settings from 1 to 255 minutes are possible for the intervals between sending attempts.
Up to 10 object instances can be monitored altogether. In the text field “Alias” an object
instance which has already been allocated an alias can be selected optionally. If this is
not preferred or if no alias is defined yet, “Manual entry” must be selected. This means
that the monitored object and the preferred instance can be manually selected.
The monitoring type as well as the minimum and maximum value depends on the moni-
tored object instance.
12
