insys icom ISDN TA 4.0, Manual

Page: 74 / 100

ISDN Error Messages INSYS ISDN TA 4.0
Cause (hex) Meaning AT re- X.25 re-
sponse sponse
3006 B3 protocol parameter not supported
3007 B channel protocol combination not supported
3008 NCPI not supported
3009 Unknown CIP value
300A Flags not supported
300B Facility not supported
300C Data length not supported
300D Reset procedure not supported
3301 Protocol error layer 1
3302 Protocol error layer 2, e.g. DTE address not valid,
TEI not valid
3303 Protocol error layer 3
3304 Another application has accepted the call
3311 Fax remote station is no fax
3312 Fax training terminated with error
3313 Fax connection termination before data transmis-
sion
3314 Fax connection termination remote termination
3315 Fax connection termination remote procedure
3316 Fax connection termination "local transmitter un-
derrun"
3317 Fax connection termination "local receiver over-
flow"
3318 Fax connection termination "local abort"
3319 Fax invalid send data
3481 Unallocated (unassigned) number 3 13, 78
3482 No route to transit network 3 0D, 78
3483 No route to destination 3 0D, 78
3486 Channel unacceptable 6 05, 78
3487 Call awarded and being delivered in an established
channel 6 05, 78
3490 Normal call clearing 3 00, 78
3491 User busy 7 01, 78
3492 No user responding 8 09, 78
3493 No answer from user (user alerted) 8 09, 78
3494 No answer from user (device off) 8 09, 78
3495 Call rejected 8 21, 78
3496 Number changed 3 0D, 78
74