INSYS ISDN TA 4.0
Functions
Configuration with AT commands
In order to use the alarm, define the
recipient number, to which the message is
to be sent, first.
When operating at a PABX, you must also
enter the outside line access code here.
AT&Z1=phonenumber
Configure the message transmission for
data connection.
AT*M0
If you want that the connection remains
established after message dispatch, select
If you want that the connection is
terminated after message dispatch, select
AT**idle=0
AT**idle=5
in order to specify the collective message,
which precedes all messages, use:
AT*V
After this command is entered, the modem
will respond and wait for the collective
message text.
The text can be a maximum of 120
characters long.
New alarm text:
In order to enter the message text, use
for alarm input 1:
for alarm input 2:
AT*V1
AT*V2
After this command is entered, the modem
will respond and wait for the individual
alarm text.
The text can be a maximum of 40
characters long.
New alarm text:
How to enter the own phone number
(MSN):
AT**MSN=<n>
In order to save the settings, use the
command
AT&W
63
